| Issue |
E3S Web Conf.
Volume 31, 2018
The 2nd International Conference on Energy, Environmental and Information System (ICENIS 2017)
|
|
|---|---|---|
| Article Number | 04012 | |
| Number of page(s) | 3 | |
| Section | 04. Pollution Control | |
| DOI | https://doi.org/10.1051/e3sconf/20183104012 | |
| Published online | 21 February 2018 | |
Distribution of heavy metals (Cu and Fe) in sea water of Gresik coastal area
Department of Environmental Engineering, Faculty of Civil and Planning, Institut Teknologi Adhi Tama, Surabaya - Indonesia
* Corresponding author: ayunindyapuspa@itats.ac.id
The improvement of industrial activities at Gresik Regency will increase the heavy metals concentration on the seawater at Gresik Regency. Therefore, the research of Fe and Cr distribution on the seawater at Gresik Regency has been conducted. Methods that were used is sampling by Nansen water sampler at three sampling points (housing in northern coastal Gresik Regency, Maspion V Industrial Estate, and Petrokimia Port). Samples were analyzed by Atomic Absorption Spectrophotometry (AAS) to determine the concentration of heavy metals. The results showed that the highest Fe and Cr concentration are located at Maspion V Industrial Estate (0.452 mg/L and 0.081 mg/L respectively). Meanwhile, Fe and Cr concentrations at the housing in northern coastal are (0.408 mg/L and 0.081 mg/L respectively). The concentration of Fe and Cr at Petrokimia Port are 0.174 mg/L and 0.021 mg/L respectively.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.