E3S Web Conf.
Volume 33, 2018High-Rise Construction 2017 (HRC 2017)
|Number of page(s)||6|
|Section||3 Construction Technology and Management|
|Published online||06 March 2018|
Economic efficiency of application of innovative materials and structures in high-rise construction
Moscow Aviation Institute (National Research University), Volokolamskoe highway, 4, Moscow, 125993, Russia
2 Moscow State University of Civil Engineering, Yaroslavskoye sh., 26, 129337 Moscow, Russia
3 Moscow Financial and Economic Institute, Novomoskovskaya street, 15a, Moscow, 129075, Russia
* Corresponding author: email@example.com
The article is devoted to the analysis of technical and economic efficiency of application of tube confined concrete structures in high-rise construction. The study of comparative costs of materials with the use of different supporting columns was carried out. The main design, operational, technological and economic advantages of the tube confined concrete technology were evaluated, conclusions were drawn about the high strength and deformation properties of axial compression of steel tubes filled with high-strength concrete. The efficiency of the tube confined concrete use is substantiated, which depends mainly on the scale factor and percentage of reinforcement affecting its load-bearing capacity.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.