| Issue |
E3S Web Conf.
Volume 38, 2018
2018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|
|
|---|---|---|
| Article Number | 01034 | |
| Number of page(s) | 4 | |
| Section | Environmental Science and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20183801034 | |
| Published online | 04 June 2018 | |
Contrast Experiment on Advanced Treatment of Pharmaceutical and Paper-making Wastewater through Cinder Fenton-like Process
1
Luohe Yinge Industrial Group Co., Ltd, 462003, Luohe, Henan, China
2
Zhengzhou University of Aeronautics, 450000, Zhengzhou, China
3
Zhengzhou University of Aeronautics, 450000, Zhengzhou, China
* Corresponding author: 191826850@qq.com
The Fenton-like process of catalyzing H2O2 with Fe2+ and cinder is adopted to subject pharmaceutical and paper-making wastewater to advanced treatment. The influence of each factor is determined using orthogonal experiment and single factor test. The optimal combination of influencing factors is 0.3mmol · L-1 of FeSO4 · 7H2O, [H2O2]:[Fe2+]=8:1 and 10g · L-1 of pyrites cinder. The reaction time in pharmaceutical wastewater and paper-making wastewater is 30min and 60min respectively, testifying to the fact that the reaction in pharmaceutical wastewater is faster than that in paper-making wastewater and the lower utilization rate of cinder in pharmaceutical wastewater. Under the optimal reaction condition, the COD removal rate of these two kinds of wastewater can reach as high as 65% and 72%. Characterized by simple operation and requiring less reagent dosage, this method does not have to regulate the pH of flooding water and allows the repeated usage of cinder.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.