| Issue |
E3S Web Conf.
Volume 38, 2018
2018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 5 | |
| Section | Water Conservancy and Civil Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20183803008 | |
| Published online | 04 June 2018 | |
Effect of Processing Parameters on 3D Printing of Cement - based Materials
National Enterprise Technology Center, China State Construction Ready Mix Concrete CO., LTD, Wuhan, China
* Corresponding author: Email: Sillybear@yeah.net
3D printing is a new study direction of building method in recent years. The applicability of 3D printing equipment and cement based materials is analyzed, and the influence of 3D printing operation parameters on the printing effect is explored in this paper. Results showed that the appropriate range of 3D printing operation parameters: print height/nozzle diameter is between 0.4 to 0.6, the printing speed 4-8 cm/s with pumpage 9 * 10-2 m 3/ h.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.