E3S Web Conf.
Volume 38, 20182018 4th International Conference on Energy Materials and Environment Engineering (ICEMEE 2018)
|Number of page(s)||5|
|Published online||04 June 2018|
Numerical Simulations of SCR DeNOx System for a 660MW coal-fired power station
Electric Power Research Institute of State Grid Jiangxi Electric Power Co., Ltd., Nanchang 330096, Jiangxi Province, China
2 Huaneng anyuan power generation co. LTD. Pingxiang 337200, Jiangxi Province, China
Aimed at the selective catalytic reduction (SCR) DeNOx system of a 660 MW coal-fired power station, which is limited by low denitrification efficiency, large ammonia consumption and over-high ammonia escape rate, numerical simulations were conducted by employing STAR-CCM+ (CFD tool). The simulations results revealed the problems existed in the SCR DeNOx system. Aimed at limitations of the target SCR DeNOx system, factors affecting the denitrification performance of SCR, including the structural parameters and ammonia injected by the ammonia nozzles, were optimized. Under the optimized operational conditions, the denitrification efficiency of the SCR system was enhanced, while the ammonia escape rate was reduced below 3ppm. This study serves as references for optimization and modification of SCR systems.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Initial download of the metrics may take a while.