| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 01027 | |
| Number of page(s) | 6 | |
| Section | Energy Engineering and Energy Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202016501027 | |
| Published online | 01 May 2020 | |
Analysis and Discussions on the Nonuniformity Problem of SCR Denitration Equipment NOx Concentration Distribution in a 600MW Coal-fired Unit
Huadian Electric Power Research Institute Co., Ltd., Hangzhou, China
* Corresponding author: xukt_2010@163.com
Combining with an engineering example, from the aspects of SCR inlet NOx concentration distribution, flue gas velocity uniformity, ammonia injection valve opening, ash deposit, abrasion and flue arrangement, the uniformity problem of SCR denitration equipment outlet NOx concentration distribution is analyzed and discussed in a 660MW coal-fired unit. The results show that the uneven distribution of NOx concentration is caused by the combined action of many factors. In the cause analysis and solution formulation, the influence factors need be overall consideration. By adjusting the ammonia injection valve opening, the uniformity of SCR outlet NOx concentration increases by about 30%, the performance of SCR denitration equipment is obviously improved. At the same time, rationalization proposals and solution measures for the improvement of outlet concentration uniformity are given in order to ensure the safe and stable operation of denitration equipment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.