Issue |
E3S Web Conf.
Volume 40, 2018
River Flow 2018 - Ninth International Conference on Fluvial Hydraulics
|
|
---|---|---|
Article Number | 03013 | |
Number of page(s) | 6 | |
Section | Hydraulic structures and their effects on bed, flow regime and ecology | |
DOI | https://doi.org/10.1051/e3sconf/20184003013 | |
Published online | 05 September 2018 |
River bank erosion opposite to transverse groynes
1
IHE Delft, Dept. of water Science and Engineering, Delft, the Netherlands
2
Delft University of Technology, Fac. of Civil Engineering and Geosciences, Delft, the Netherlands
Long series of groynes are built from both river sides to narrow river channels and prevent bank erosion with the aim to improve the conditions for inland navigation and prevent lateral channel migration. Single groynes or short series of groynes are built to impede local bank erosion, deviate the water flow, free an intake or fix the position of migrating bars at certain locations. These structures divert the flow towards the opposite river side where channel bed erosion increases the risk of bank failure. Flow and river bed adaptation have been extensively studied, especially for long series of groynes. Instead, studies dealing with opposite bank erosion caused by single or short series of groynes are still lacking. We investigated this phenomenon in the laboratory and using 2D numerical models with LES. This paper shows some preliminary results.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.