Issue |
E3S Web Conf.
Volume 40, 2018
River Flow 2018 - Ninth International Conference on Fluvial Hydraulics
|
|
---|---|---|
Article Number | 03016 | |
Number of page(s) | 8 | |
Section | Hydraulic structures and their effects on bed, flow regime and ecology | |
DOI | https://doi.org/10.1051/e3sconf/20184003016 | |
Published online | 05 September 2018 |
Experimental Study of Submerged Vanes in Intakes under Sediment Feeding Conditions
Department of Civil Engineering, İzmir University of Economics, 35330 İzmir, Türkiye
* Corresponding author: asli.turkben@ieu.edu.tr
Sediment is transported along the river flow and deposited in the mouth of the intake structure over time and reducing the water intake capacity. Nowadays, many water intake structures lose their function and are closed to operation. To deal with this problem, recently, submerged vane application has offered a practical and economical solution. The aim of this study was to evaluate the efficiency of three vane installations under sediment feeding conditions by comparing the bed topography before and after vanes were installed. For that purpose, experiments were carried out in a laboratory channel running for 90-degree intake angle. Three vanes were installed in one column at near the intake entrance. The vanes dimensions were equal to; 3cm height, 12cm long, 10 mm thick, and aligned with α = 20° angle to flow direction. The tests were run until equilibrium was reached, i.e. when the outgoing solid discharge was equal or larger than 90% of the incoming. Once the bed topography remained stable, bed and water level surfaces were measured. tests were carried out by feeding sediment from upstream of the main channel.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.