E3S Web Conf.
Volume 40, 2018River Flow 2018 - Ninth International Conference on Fluvial Hydraulics
|Number of page(s)||8|
|Section||Fluid mechanics and sediment processes|
|Published online||05 September 2018|
Numerical analysis of flood with a double grid model
Graduate School of Engneering, Hokkaido University, Hydraulic Research Laboratory, Japan
2 Faculty of Engineering, University of Toyama, Japan
* Corresponding author: firstname.lastname@example.org
The objective of this study is to verify the validity of a hyper grid type (double grid model) computational model, for calculating flood flows with inundations. Nowadays, detailed information of the bathymetry is available due to improved measurement techniques, such as LP data. However, the number of grid cells used in the computation is limited because of the limitation of computational infrastructures. A double grid approach based on the model proposed by Volp et. al.(2013) is employed to overcome this problem.This model directly uses the high resolution topographic data though the discretization of the governing equations are made on coarser grid. The computational results showed that the present numerical model can compute the large scale flood phenomena efficiently and accurately.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.