Issue |
E3S Web Conf.
Volume 43, 2018
ASTECHNOVA 2017 International Energy Conference
|
|
---|---|---|
Article Number | 01009 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20184301009 | |
Published online | 29 June 2018 |
Design and Implementation Buck Converter for 540WP Solar Charger Using Fuzzy Logic Control
Electrical Engineering Department Politeknik Elektronika Negeri Surabaya, Indonesia
sutedjo@pens.ac.id
ony@pens.ac.id
andiardianto.id@gmail.com
diahsepti@pens.ac.id
nuning@pens.ac.id
mdarwis@staff.pens.ac.id
This paper presents the details of design and implementation of DC-DC Buck converter as solar charger. This converter is designed for charging a battery with a capacity of 100 Ah (Ampere Hours) which has a charging voltage of 27.4 volts. The constant voltage method is selected on battery charging with the specified set point. To ensure the charging voltage is always on the set point, the duty cycle control of buck converter is set using Fuzzy Logic Control (FLC). The design implementation has been tested on PV (photovoltaic) with 540WP capacity. Based on the test results, this method is quite well implemented on the problem charger
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.