E3S Web Conf.
Volume 44, 201810th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|Number of page(s)||7|
|Published online||03 July 2018|
Analysis of granulometric dust accumulating in supply and exhaust ventilation filters
The President Stanisław Wojciechowski State University of Applied Sciences in Kalisz, 62-800 Kalisz, ul. Nowy Świat 4, Poland
* Corresponding author : firstname.lastname@example.org
The research aim was to analyse and compare the composition of granulometric dust which accumulates in air filters located in central air handling units supporting the production rooms and at the same time the degree and a kind of contamination fraction of atmospheric air in a part of Wrocław situated outside the city centre. Samples were taken in different seasons of the year, such as March and October. The size of pollution particles extracted from ventilation filters was measured with the use of ANALYSETTE 22MicroTec plus laser particle sizer produced by FRITSCH. The results of measurements were generated with MaScontrol software for particle size analysis. In computing research results, the Fraunhofer diffraction theory was used. The comparison of the examined air particles’ size in an air supply canal allowed to determine the outside air dust size in Szczepin district on Długa street in Wrocław. Moreover, the influence of the year season on the size of contaminants accumulating in filters was also determined in the course of research works.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.