Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
---|---|---|
Article Number | 00033 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/20184400033 | |
Published online | 03 July 2018 |
Effect of aluminium oxide nanoparticles on the enzymatic activity on microorganisms of activated sludge
Warsaw University of Technology, Faculty of Building Services, Hydro and Environmental Engineering, Department of Biology, Nowowiejska 20, 00-653 Warsaw, Poland
* Corresponding author : nina.doskocz@pw.edu.pl
The increased production and commercial use of nanoparticles (NPs), combined with a lack of regulation regarding their disposal, may result in the unwanted introduction of NPs to wastewater. Wastewater nutrient removal depends on the metabolisms of activated sludge bacteria and their related key enzymes. Therefore, the aim of this work was to determine the effect of aluminium oxide nanoparticles concentrations on the activated sludge enzymatic activity of microorganisms. Tested nanoparticles inhibition cellular respiration in TTC method in the four highest tested concentrations. Moreover, in most samples observed increase dehydrogenase activity. In this study, nano-Al2O3 also caused a clear stimulation of the activity of hydrolytic enzymes microorganisms of activate sludge. Effects of aluminum oxide (compound in bulk forms) on enzymatic activity were different than in the case of the nano from of Al2O3.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.