| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00165 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400165 | |
| Published online | 03 July 2018 | |
An openwork like structures of polylactide – manufacturing and properties
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
* Corresponding author: karolina.sobczyk.pwr@gmail.com
Poly(lactic acid) electrospinning tests were carried out under various process conditions. Openwork structures with a high surface area to weight ratio have been obtained. Changing the parameters of the PLA electrospinning process resulted in products with different fiber morphology.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.