| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00014 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400014 | |
| Published online | 03 July 2018 | |
Microporous structures in natural polymer
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
* Corresponding author: Maciej.Borowczak@wp.pl
Electrospinning of biodegradable poly (butylene succinate) has been performed from different solvent systems. Alternation of process parameters resulted in respective changes of the surface structure topography which was evaluated by using scanning electron microscopy (SEM).
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.