E3S Web Conf.
Volume 45, 2018VI International Conference of Science and Technology INFRAEKO 2018 Modern Cities. Infrastructure and Environment
|Number of page(s)||8|
|Published online||30 July 2018|
Water load pattern in a production hall
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeże Wyspiańskiego 27, 50–370 Wroclaw, Poland
* Corresponding author: firstname.lastname@example.org
The actual volume of water consumption in the various industrial halls is very diverse. Many factors have an impact on that value, depending on the demand for: domestic, fire-fighting, technologically specific target and other purposes. The demand for domestic water in the production hall is primarily due to the use of showers, wash basins and flush toilets. Workplaces should be appropriately equipped with hygienic and sanitary facilities, depending on its degree of soiling, type of work and gender. The water flow is relevant for dimensioning the water supply system including the diameter selection of the water pipes. Criterion for selection of the diameter is the flow velocity of the water which varies depending on the manufacturer’s guidelines, the material used and the law. The article analyses the dynamics of load pattern of hot water in industrial halls. The methods of flow calculation in production halls based on an analysis of patterns available in literature and the water flow velocity criteria is discussed. The results of the research of the dynamics of water load pattern in a production hall located in Wroclaw is presented and discussed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.