Issue |
E3S Web Conf.
Volume 45, 2018
VI International Conference of Science and Technology INFRAEKO 2018 Modern Cities. Infrastructure and Environment
|
|
---|---|---|
Article Number | 00057 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/20184500057 | |
Published online | 30 July 2018 |
The influence of selected factors on the load capacity of sewers that are renovated using the relining method
Wroclaw University of Science and Technology, Faculty of Civil Engineering, Poland
* Corresponding author: beata.nienartowicz@pwr.edu.pl
The paper contains the results of a lengthy analysis of the operation of sewers renovated using the relining method. The author based the analysis on the effects obtained from computer simulations that were carried out using the Finite Element Method. The models used to proceed with the FEM simulations were verified by the results obtained from 1:1 laboratory research, conducted by the author over the period 2011-2013. The influence of a few strictly defined factors, related to the cooperation between the liner, injection grout and the construction of the original pipe, were taken into consideration. The report contains the description of FEM simulations and their assumptions, as well as a synthetic analysis of the results.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.