E3S Web Conf.
Volume 49, 2018SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|Number of page(s)||10|
|Published online||13 August 2018|
Validation of a dynamic simulation program according to EN ISO 15265
Lublin University of Technology, Faculty of Civil Engineering and Architecture, st. Nadbystrzycka 40, 20-618 Lublin, Poland
* Corresponding author: email@example.com
EN ISO 15265 is a standard describing validation procedures concerning dynamic simulation programs for evaluation of energy demand in buildings. The validation procedure comprises 12 tests altogether: 4 introductory ones and 8 proper validation tests differing with the assumptions concerning the partition construction, the thermal mass, window shading, external gains and functioning of the installation systems. Some procedures, for instance the calculation of solar radiation incident on the vertical planes, are not clearly described in the standard. The paper presents the discussion of possible interpretations of the procedures included in the standard and the results of validation of a simulation program based on the control volume method.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.