Open Access
Issue |
E3S Web Conf.
Volume 49, 2018
SOLINA 2018 - VII Conference SOLINA Sustainable Development: Architecture - Building Construction - Environmental Engineering and Protection Innovative Energy-Efficient Technologies - Utilization of Renewable Energy Sources
|
|
---|---|---|
Article Number | 00040 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/20184900040 | |
Published online | 13 August 2018 |
- K.J. Lomas, H. Eppel, C.J. Martin, D.P. Bloomfield, Energ. Buildings 26, 253 (1997) [CrossRef] [Google Scholar]
- S.Ø. Jensen, Energ. Buildings 22, 133 (1995) [CrossRef] [Google Scholar]
- M.C. Kersken, I. Heusler, P. Strachan: Full scale empirical validation for building energy simulation programs, 9th International Conference on System Simulation in Buildings, Liege, December 2014: https://www.researchgate.net/publication//280013681 (access 11.04.2017) [Google Scholar]
- R. Judkoff, D. Wortman, B. O'Doherty, J. Burch: A methodology for validating building energy analysis simulations (National Renewable Energy Laboratory, Technical Report NREL/TP-550-42059, 2008) [CrossRef] [Google Scholar]
- EN 15265:2011 Thermal performance of buildings. Calculation of energy needs for space heating and cooling using dynamic methods. General criteria and validation procedures (European Committee for Standarization, Brussels, 2011) [Google Scholar]
- EN ISO 13791 Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures (European Committee for Standarization, Brussels, 2012) [Google Scholar]
- EN ISO 13792 Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods (European Committee for Standarization, Brussels, 2012) [Google Scholar]
- Validation of IDA Indoor Climate and Energy 4.0 with respect to CEN Standards EN 15255:2007 and EN 15265:2007 (Technical Report, EQUA Simulation, 2010). [Google Scholar]
- Presentation from EN 15265:2007 with VIP-Energy version 3:www.vipenergy.net/Presentation_from_EN15265.pdf (access 19.05.2017) [Google Scholar]
- DesignBuilder v4.5‒EN 15265/ISO 13790 Validation Report:www.designbuilderitalia.it/wp-content/uploads/2015/05/Designbuilder-v4-5_EN-15265_ISO-13790-Validation-Report.pdf (access 19.05.2017) [Google Scholar]
- H.C. Hottel, B.B. Woertz, Trans ASME 64, 91 (1942) [Google Scholar]
- J.F. Orgill, K.G.T. Hollands, Sol. Energy 19, 357 (1977) [CrossRef] [Google Scholar]
- D.T. Reindl, W.A. Beckman, J.A. Duffie, Sol. Energy 45, 1 (1990) [Google Scholar]
- B.H.Y. Liu, R.C. Jordan, Sol. Energy 7, 53 (1963) [CrossRef] [Google Scholar]
- R.C. Temps, K.L. Coulson, Sol. Energy 19, 179 (1977) [Google Scholar]
- T.M. Klucher, Sol. Energy 23, 111 (1979) [Google Scholar]
- J.E. Hay, Sol. Energy 23, 301 (1979) [Google Scholar]
- C.A. Gueymard: An anisotropic solar irradiance model for tilted surfaces and its comparison with selected engineering algorithms. Sol Energy 38, 367 (1987) [CrossRef] [Google Scholar]
- T. Muneer: Solar Radiation and Daylight Models, (Elsevier Butterworth-Heinemann, 2004) [Google Scholar]
- T. Muneer, Build. Serv. Eng. Res. 10, 81 (1989) [CrossRef] [Google Scholar]
- R. Perez, R. Stewart, C. Arbogast, R. Seals, J. Scott, Sol. Energy 36, 481 (1986) [Google Scholar]
- R. Perez, R. Seals, P. Ineichen, R. Stewart, D. Menicucci, Sol. Energy 39, 221 (1987) [CrossRef] [Google Scholar]
- R. Perez, P. Ineichen, R. Seals, J. Michalsky, R. Steward, Sol. Energy 44, 271 (1990) [Google Scholar]
- H. Lund: Revised splitting procedure for calculation of direct normal radiation and diffuse radiation (Thermal Insulation Laboratory, Technical University of Denmark, Lyngby 1979) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.