E3S Web Conf.
Volume 53, 20182018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|Number of page(s)||4|
|Section||Environment Engineering, Environmental Safety and Detection|
|Published online||14 September 2018|
The Effect of Different Operational Parameters on Biomass(The Pine Wood) Gasification
Huangzhong University of Science and Technology, School of Energy and Power Eingineering, Wuhan, Hubei, China
2 Yangtze University, Department of Petroleum Eingineering, Wuhan, Hubei, China
* Corresponding author: firstname.lastname@example.org
Biomass gasification gains additional significance each year. For the pursuit of the H2 content of product gas, selecting air-dried pine wood chips as gasification feedstock, a lot of experimental work is completed in gasifier by altering the operation parameters such as particle size(60mesh,80mesh,100mesh),temperature (700°C,750°C,800°C,850°C,900°C) and steam mass to biomass mass ratio(S/B)(0.7,1.4,2.1,2.8).The effects of operation parameters on the ingredients of product gas are analyzed, which predicts the optional operation parameters for other biomass gasification.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.