E3S Web Conf.
Volume 53, 20182018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|Number of page(s)||4|
|Section||Environment Engineering, Environmental Safety and Detection|
|Published online||14 September 2018|
Analysis of Calculation Errors for Single-zone and Multi-Zone Natural Ventilation model in Residential Building
School of Energy and Environment, Southeast University, Nanjing, 210096, China
* Corresponding author: firstname.lastname@example.org
The typical residential building in Changzhou City, Jiangsu Province was selected for natural ventilation measurement during the transitional season, the plum rainy season, summer and winter. In this paper, SF6 is used as the tracer gas, and tracer gas decay method was selected to obtain the air change rate in the room under each measuring condition. EnergyPlus(EP) was used to calculate the single-zone and multizone air change rate which can be compared with the measured values respectively. It was found that the calculated values of single-zone model were generally small and the errors were large. And the calculated values of multi-zone model have a significant reduction in error after considering the equivalent infiltration area. In addition, the effective infiltration area will be different due to the existence of the thermal expansion coefficient for different seasons.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.