Issue |
E3S Web Conf.
Volume 56, 2018
VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
|
|
---|---|---|
Article Number | 02005 | |
Number of page(s) | 6 | |
Section | Geomechanical Problems of Development of Subsoil | |
DOI | https://doi.org/10.1051/e3sconf/20185602005 | |
Published online | 26 September 2018 |
Management of geomechanical processes - the basis for selecting the optimal technologies for the development of mineral deposits
Mining Institute KSC RAS, Lab. of Geomechanics, Apatity, Russia
* Corresponding author: fjulia@mail.ru
When carrying out mining operations, a rock massif responds to technological impacts in the form of developing strains and fractures. Under certain conditions, this response occurs as dynamic and gas dynamic destructions of rocks with intensive release of energy, which creates threats to security and disrupts a working technology. To substantiate the optimal mining technology, which would be maximum adequate to the specific geological and geomechanical conditions of a deposit development, it is necessary to organize a comprehensive monitoring of geomechanical processes in rock massifs. The paper considers general principles to organize the geomechanical monitoring under conditions of the hierarchically-blocked rock massifs in the gravitational-tectonic field of the natural stress state. The authors give main recommendations for managing geomechanical processes in the rock mass for various mining methods.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.