Issue |
E3S Web Conf.
Volume 57, 2018
2018 3rd International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2018)
|
|
---|---|---|
Article Number | 03008 | |
Number of page(s) | 6 | |
Section | Smart Grid and Power System | |
DOI | https://doi.org/10.1051/e3sconf/20185703008 | |
Published online | 05 October 2018 |
Research on Switching Model of Microgrid with Distributed Power Supply
1
Renewable Energy Research Center, State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems, China Electric Power Research Institute, Beijing, China
2
Power Grid Technology Center, Power Science Research Institute of State Grid Jiangsu electric power CO,. LTD, Nanjing, China
3
HeFei University of Technology, Hefei, China
The hybrid microgrid with distributed power supply which includes wind turbine (WT), photovoltaic (PV) inverter and power converter system (PCS), not only could be connected to the power distribution network, but also can operate independently. It is realized switch from grid-connected mode to off-grid mode through the microgrid controller. Whether the microgrid can achieve smooth switching from grid-connected to off-grid has great influence on the safety and stability of the power grid. In order to accurately evaluate the influence of the microgrid switch to the distribution network, it is needed to research on the distributed source modeling technology, and establish an accurate microgrid model. In this paper, using a 400V voltage grade microgrid system with PV, WT and PCS as an example, model the internal equipment and the microgrid control system, and establish a microgrid model for simulation. At the meantime, it carries out the microgrid switch testing, and compare with the measured waveform to verify the accuracy of the model. It is confirmed the accuracy of the microgrid model by the contrast result.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.