E3S Web Conf.
Volume 58, 2018Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2018)
|Number of page(s)||6|
|Section||Models and Methods for Assessing the Reliability of Intelligent Energy Systems|
|Published online||10 October 2018|
Calculations of the complex network’s steady-state modes by brining it to equivalent open
Power Supply Department, S.Seifullin Kazakh Agrotechnical University, Kazakhstan
2 Direction of Information Systems of JSC Kaztelecom, Kazakhstan
* Corresponding author: firstname.lastname@example.org
The paper considers the development of the idea of diakoptics as applied to the calculation of the steady-state modes of energy system’s complex electrical networks. The well-known goal of diakoptics is to obtain the equations of state for the dedicated part of the system, the study of which is much simpler than the study of the initial system and can be achieved by improving its steady state equations. Technique for dividing a complex-closed system into a set of uncomplicated subsystems was developed based on the inverse form of nodal equations. Analytic expressions for the intersection circuits obtained based on identical equality of voltage at the nodes of the system division into subsystems are proposed. Using the example of 110kV network calculation, the technique for determining the matrixes of generalized parameters of the dedicated subsystems, the sizes of which depend on the number of their broken link is shown. Analytical determination of the equality condition of the voltage of subsystems intersections nodes, allowed analyzing a complex closed network by bringing it to an equivalent open.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.