E3S Web Conf.
Volume 60, 2018Ukrainian School of Mining Engineering
|Number of page(s)||9|
|Published online||16 October 2018|
Interaction of deformation-strength characteristics of the support load-bearing elements in the preparatory workings
National Mining University, Department of Underground Mining, 19 Yavornytskoho Ave., 49005 Dnipro, Ukraine
2 LLC “DTEK Energy”, Department on Coal Production, 57 Lva Tolstoho St., 01032 Kyiv, Ukraine
3 MM “Dniprovske”, PJSC “DTEK Pavlohradvuhillia”, 76 Soborna Ave., 51400 Pavlohrad, Ukraine
4 MM “Pershotravenske”, PJSC “DTEK Pavlohradvuhillia”, 76 Soborna Ave., 51400 Pavlohrad, Ukraine
* Corresponding author: email@example.com
The objective of this work is to study the relationship of the deformation-strength characteristics of the fastening system with its displacement value. The tendencies of influence are divided into two groups. The multivariate computational experiments have been performed in the conditions of coal-face works. It is shown the influence of geomechanical conditions of the mine working maintenance on the fastening system operating mode change when choosing its rational deformation-strength characteristics. On the basis of the performed studies, it was concluded that it is necessary to adjust the fastening elements of each specific support setting scheme. This is necessary to provide recommendations for the maintenance schemes optimization of reusable extraction workings.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.