| Issue |
E3S Web Conf.
Volume 63, 2018
Seminary on Geomatics, Civil and Environmental Engineering (2018 BGC)
|
|
|---|---|---|
| Article Number | 00020 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/20186300020 | |
| Published online | 14 November 2018 | |
Low cost real time UAV stereo photogrammetry modelling technique – accuracy considerations
Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
* e-mail: pawel.burdziakowski@pg.edu.pl
The paper presents accuracy considerations regarding three 3D modelling techniques. The tested new consumer type stereo camera (ZED 3D Stereolabs) has been implemented info an aerial mapping system, on board micro air vehicle MAV) and tested object has been mapped using a real-time photogrammetry with original real-time software application. The evaluated results has been compared with model gained with a state of art unmanned aerial vehicles (UAV) photogrammetry process using commercial UAV and commercial software, and the terrestrial photogrammetry modelling process with other commercial software. Papers concludes the tested real-time technology accuracy with compare to the traditional technique, and discusses real-time photogrammetry modelling in terms of engineering applications.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.