Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 02001 | |
Number of page(s) | 5 | |
Section | Bioenergy | |
DOI | https://doi.org/10.1051/e3sconf/20186702001 | |
Published online | 26 November 2018 |
The utilization of solid waste treatment for charcoal making and water heating by continuous incineration
Department of Mechanical Engineering, Faculty of Engineering, Universitas Pancasila, Srengseng Sawah, Jakarta 12640, Indonesia
* Coresponding author: pane_erlanda@yahoo.com
The utilization of solid waste incineration still has the low percentage, whereas the incineration can add the value of solid waste. This research conducted to analyse of solid waste incineration with methods that classified into two steps that are the analyse of requirement between solid waste and air supply to determine of mass and energy balance, and the pilot scale experiment to analyse the utilization of heat energy from solid waste incineration for charcoal making and water heating. The results show that the 12.5 kg solid waste mass request the 5.78 kg/h combustion rate to produce heat energy up to 134.4 kJ, where can transform 1 kg coconut shell to 500 g charcoal and increase the water temperature from 32°C to 62°C. The research will be continued with analyse of air supply for incineration process temperature increasing, which can determine the combustion rate that influences the heat energy product.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.