Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 02016 | |
Number of page(s) | 5 | |
Section | Bioenergy | |
DOI | https://doi.org/10.1051/e3sconf/20186702016 | |
Published online | 26 November 2018 |
Biodiesel deposit characterization on hot chamber test rig with biodiesel fuels (B20) and bioaditif essential oil (atsiri)
1
BT2MP-BPPT, Area Puspiptek, Serpong, Muncul, Setu, South Tangerang, Banten 15310, Indonesia
2
Departement of Mechanical Engineering, University of Indonesia, 16424, Indonesia
* Coresponding author: muchammad.taufiq@bppt.go.id
In this study, the deposit formation of B20-NA biodiesel with the addition of bioadditive Essential Oil with different variations, B20 + Essential Oil 1:2000, B20 + Essential Oil 1:3000, B20 + Essential Oil 1: 4000 and B20 + Essential Oil 1:5000 method of hot plate drops to know the characteristics and mechanisms of deposit formation on each variation of fuel. The research is carried out by the deposition process and evaporation of Diesel fuels carried out repeatedly on a hot plate. The plate is heated with temperature variations inside the enclosed space so that the conditions are close to the real conditions of the engine. This test uses a hot chamber test rig. The use of bioadditive essential oils (atsiri) which have turpentine contents bind water content and residues in biodiesel fuel is expected to accelerate the process of excessive deposit release in the combustion chamber. This study aims to find the optimum fuel and temperature variations so that the deposit release process can be accelerated.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.