E3S Web Conf.
Volume 67, 2018The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|Number of page(s)||6|
|Published online||26 November 2018|
Optimizing micro milling energy consumption for green manufacturing based on cutting strategies
Departement of Mechanical Engineering, Universitas Indonesia, Depok 16424 Indonesia
* Coresponding author: email@example.com
Micro milling is currently being used to make micro-sized products, such as in MEMS, medical devices, etc. But in the process of machining, especially in roughing process, micro milling spends a lot of energy that can still be reduced to contribute to green manufacturing. This study focuses on developing the model of energy consumption during the micro milling processes. The model is then used to map the energy consumption from different cutting toolpaths and strategies. Furthermore this study also comparing and characterizing the energy consumed between macro milling and micro milling of the same part shape but with significant different in size. In conclusion, this study shows different characteristics and comparison in energy consumption between micro milling and macro milling.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.