| Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 6 | |
| Section | Multifunctional and Advanced Materials | |
| DOI | https://doi.org/10.1051/e3sconf/20186703015 | |
| Published online | 26 November 2018 | |
Enhanced coal bed methane (ECBM) recovery: optimization of CBM production using different injected gas composition and rate for south sumatra CBM field, Indonesia
1
Chemical Engineering Department, Universitas Indonesia, Depok, Indonesia
2
Petroraya Consulting, Wisma Raharja, 1st Floor, Jl. T.B. Simatupang Kav.1, Jakarta, 12560, Indonesia
* Coresponding author: wahid@che.ui.ac.id
Indonesia, whose 453 TCF potential coal bed methane (CBM) reserves, rank the 6th largest CBM reserves around the world. However, the technical limitation is amongst the major issues slowing down the exploitation progress of the resources which current national CBM production only reach up to 1 MMSCFD. This paper provides a newly enhanced coal bed methane (ECBM) recovery method to improve the methane production. Scenarios of nitrogen (N2) and carbon dioxide (CO2) injection were used in this study to perform 25 years production simulation and compared with CBM primary production. Created hypothetical model based on the characteristic of coal seams CBM field in South Sumatra, Indonesia, was used to analyze the increasing methane production by using N2 and CO2 injection with different compositions and rates. The result observed about 3,52% incremental methane production by injecting N2 into CBM reservoir. In other words, this new method has an impact on enhancing the CBM national production, particularly South Sumatra CBM field, which could be useful for further CBM development in Indonesia. Mixture injection seemed to be unfavorable for the field due to the difference of gas mechanism. Thus
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.