E3S Web Conf.
Volume 71, 2018XVIII Conference of PhD Students and Young Scientists “Interdisciplinary Topics in Mining and Geology”
|Number of page(s)||6|
|Published online||05 December 2018|
Accuracy analysis of satellite measurements of the measurement geodetic control network on the southern Spitsbergen
Wroclaw University of Science and Technology, Faculty of Geoengineering, Mining and Geology, 27 Wyb. Wyspiańskiego St., 50-370 Wroclaw, Poland
* Corresponding author: firstname.lastname@example.org
Geodetic networks are very important in analyses of long-term monitoring deformation of natural objects in polar regions. The ground stability of geodetic reference points can give the quality of the results of geometry measures. Well measures give the purpose to environmental protection of measured natural objects (moraines, talus slopes, debris etc.). The main objective of this paper is to compare the adjustment of the geodetic network by the Least Square Method based on one (ASTRO) or two (ASTRO and NYA1) reference points with full rank and robust adjustment. The main adjustment steps with important numerical results are presented for both methods. The method how to detect the presence of the used wrong approximate coordinates of network points is addressed, and the detection approaches are given for both adjustment procedures. The results of both adjustment procedures summarized in the Conclusion indicate that the combination of these procedures is not suitable way of detecting errors in a geodetic network.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.