E3S Web Conf.
Volume 72, 20182018 The International Conference on Electrical Engineering and Green Energy (CEEGE 2018)
|Number of page(s)||4|
|Section||Modern Electronic Technology and Application|
|Published online||05 December 2018|
Torque Analysis of Scotch Yoke Type Hydraulic Actuator
Dept. of Energy and Mech. Eng., Graduate school, Gyeongsang National University, South Korea
2 Dept. of Energy and Mech. Eng., Institute of Marine Industry, Gyeongsang National University, Cheondaegukchi-Gil 38, Tongyeong, 53064, South Korea
3 9, Hwajeonsandan 5-ro 98 beo-gil, Gangseo-gu, Busan, South Korea
At present, hydraulic actuators have been strongly highlighted in the shipbuilding industrial applications. The actuators are classified into three types according to their operation, such as scotch yoke, rack and pinion, rod and crank type. However, hydraulic actuators are more difficult than others electric motors because of nonlinear flow-pressure characteristics and many cases of torque between moving parts. In this paper, in order to obtain the data of the valve locking torque value of the scotch yoke, the pressure was applied at a pressure of 6~16 MPa and analysis by depending on cylinder diameter and yoke length using ANSYS tool. According to the results of generating torque value, it is understood that the torque increases as the cylinder diameter increases and the moment arm becomes longer. It can be also seen that the all average error rates of experimental values and program analysis values are only under the 3%.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.