E3S Web Conf.
Volume 73, 2018The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|Number of page(s)||4|
|Section||Environmental Technology and Pollution Control|
|Published online||21 December 2018|
Potential Utilization of Sewage Sludge from Water Treatment Plant as Brick Material
1 Department of Environmental Engineering, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
2 Department of Architecture Engineering, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
* Corresponding author: email@example.com
One of the results of the water treatment process is the sludge. Generally, the processed sludge from the water treatment is collected and delivered to a landfil. With the delivery of sludge waste, it requires additional cost as a levy in handling sludge waste. Therefore, it is needed to innovate on the recycling of sludge. The waste recycling process is expected to minimize the residual impact of the Water Treatment Plant. The process of waste recycling can be done by utilizing sludge from water treatment, which is brick making process. The benefits can eliminate environmental problems and also some economic problems. This study aims to determine the potential of sludge from water treatment plant to be added for brick making by investigating the physical and characteristics of sludge. The research findings show that sludge waste has the potential to become a brick raw material depending on the nature and clay microstructure
Key words: recycling / sludge / brick
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.