E3S Web Conf.
Volume 73, 2018The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|Number of page(s)||4|
|Section||Environmental Technology and Pollution Control|
|Published online||21 December 2018|
Circulation of Leachate Organic Solid Waste in Fixed Bed Reactor with Pressure Swing Absorption Technology
Department of Environmental Engineering, Institut Teknologi Nasional (Itenas) Bandung - Indonesia
* Corresponding author: firstname.lastname@example.org
Treatment of solid waste that can be applied to reduce solid waste into the landfill is the treatment of organic solid waste into a biogas. The largest component of biogas is CH4 and CO2 Alternative organic solid waste treatment is anaerobic digestion, besides reducing waste, this process can also produce renewable fuels. This research processed the leachate organic solid waste from Itenas cafetaria using fixed bed reactor. Volume reactor 180 liters with sponge filter media. An increase the concentration gas CH4 conducted using pressure swing absorption technology with pressure 1 bar on the reactor metanogen and -0,01 bar on stripper. Variation circulation a substrate for 0,30, 0,32, and 0,33 circulation per hour. Parameter measured are COD, TVA, pH, temperature, alkalinitas, and CO2, CH4. The result of this research obtained gas CH4 highest concentration of 90 % in a gas holder metanogen, and the highest CO2 24,36 % in a gas holder stripper on volumetric 0,33 circulation/hours.
Key words: Methane / pressure swing absorption / leachate
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.