Issue |
E3S Web Conf.
Volume 73, 2018
The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|
|
---|---|---|
Article Number | 05029 | |
Number of page(s) | 4 | |
Section | Environmental Technology and Pollution Control | |
DOI | https://doi.org/10.1051/e3sconf/20187305029 | |
Published online | 21 December 2018 |
Static and Dynamic Analysis of Vibro Fluidized Bed Dryer using Finite Element Method
1 Department of Mechanical Engineering, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
2 Undergraduate of Mechanical Engineering Departement, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
* Corresponding author: efnan2003@gmail.com
Vibro Fluidized bed dryer is a widely used tea dryer now. Its function is to stop the enzymatic oxidation process and decrease water content up to 2,8-3,8%. The working principle is to use the vibrations generated by the eccentric motor so that the tea powder that runs on the bed will vibrate. The purpose of this research is to model, static and dynamic of vibro fluidized bed dryer. The analysis was to determine the maximum stress and natural frequency of the vibro fluidized bed dryer to the variation of green tea mass being processed. Using dynamic analysis the obtained first three natural frequencies of the vibro fluidized bed dryer were 5,8876 Hz, 9,5267 Hz, and 10,512 Hz. The results showed that at 695 kg tea mass the natural frequency has the same as the excitation frequency. In this case, the safety factor of the vibro fluidized bed dryer is 27.6. It can be concluded that the maximum capacity of the vibro fluidized bed dryer is 695 kg..
Key words: Vibro Fluidized bed Dryer / Safety factor / Static analysis
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.