E3S Web Conf.
Volume 73, 2018The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|Number of page(s)||5|
|Section||Environment, Infrastructure Development, Culture and Society|
|Published online||21 December 2018|
Analysis of company operating feasibility using Energy Productivity Ratio (EPR)
1 Lecturer Department of Industrial Engineering, Faculty of Engineering, University Sumatera Utara, Medan, Indonesia
2 Student Department of Industrial Engineering, Faculty of Engineering, University Sumatera Utara, Medan - Indonesia
* Corresponding author: firstname.lastname@example.org
This research is conducted in a company engaged in the manufacture of pesticides. The company has never measured it's energy productivity. The company is only based on production targets and financial benefits achieved each year. One method that can be used in productivity measurement and operational feasibility is Energy Productivity Ratio (EPR). EPR is expressed as the ratio of energy output to the energy input. The feasibility of the company's operation can be seen from the energy productivity value. The purpose of research conducted to 1) Measure the level of energy productivity 2) Measuring the feasibility of the company's operations 3) Identify the factors that influence the value of energy productivity ratio (EPR) and 4) Provide proposed steps to increase energy productivity. EPR is made by collecting data on material requirements, power requirements, machine and equipment data and the number of products produced. After doing the calculation of energy input and energy output, the final step is to calculate the value of Energy Productivity Ratio (EPR). By this research we know the company is feasible to operate because the value of EPR> 1, although it must be repaired to increase the value.
Key words: Energy Productivity Ratio (EPR) / productivity energy / ratio / input / outpu
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.