E3S Web Conf.
Volume 91, 2019Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|Number of page(s)||7|
|Section||Power Transmission and Generation|
|Published online||02 April 2019|
Sensorless vector control of a permanent magnet synchronous motor
Peter the Great St.Petersburg Polytechnic University, Polytechnicheskaya, 29, St. Petersburg, 195251, Russia
The most common control system for a synchronous motor with permanent magnets is a vector control system. The construction of such a system has a number of difficulties, one of them is the need to have information about the current position of the rotor. Data on the position of the rotor can be obtained using sensors, or include a supervisor in the control system. The article describes an adaptive observer of the position and speed of the rotor of a synchronous motor with permanent magnets. This observer is used in the system of sensorless vector control of the electric drive. The presented version of the observer of the engine state is realized by creating a model in the Matlab Simulink software package. The results of experimental verification of the presented observer at the stand with the use of an engine with a power of 200 W are shown. The aim of the work is to develop an observer that is stable to changing drive parameters. This is achieved by using a relay unit in the view of the observer, which implements the slip mode.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.