| Issue |
E3S Web Conf.
Volume 91, 2019
Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|
|
|---|---|---|
| Article Number | 02026 | |
| Number of page(s) | 7 | |
| Section | Energy-Efficient Construction | |
| DOI | https://doi.org/10.1051/e3sconf/20199102026 | |
| Published online | 02 April 2019 | |
Controlling methods of buildings’ energy performance characteristics
Moscow State University of Civil Engineering, 129337, 26, Yaroslavskoe Shosse, Moscow, Russia
* Corresponding author: aljurgaitis@gmail.com
The comparison of energy audit regulatory documents results in the great difference of method holding description and the amount of modern energy investigation techniques in domestic and foreign practices. The most common are two methods: thermovision inspection and the Blower Door system. The collation of inspection data proved the necessity of the introduction on a mandatory basis method using Blower Door. The comparison of energy audit holding parameters in Russia, the USA and Europe showed the difference in the structured approach to this problem.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.