Issue |
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
|
|
---|---|---|
Article Number | 05005 | |
Number of page(s) | 6 | |
Section | Geomaterial Behaviour: Compressibility and Time-dependency | |
DOI | https://doi.org/10.1051/e3sconf/20199205005 | |
Published online | 25 June 2019 |
How to interpret consolidation and creep in Yoldia clay
Department of Civil Engineering, Aalborg University, Denmark
* Corresponding author: epe@civil.aau.dk
The aim of this paper is to define a guideline for an objective interpretation of oedometer tests on Yoldia clay. The approach followed consists in a first analysis where the separation of strains is applied to the consolidation curves. During this phase, primary consolidation strains are filtered from creep by using Brinch-Hansen, Taylor and ANACONDA method. The second phase of the interpretation aims to determine the preconsolidation stress according to three different theories (Akai, Janbu and Casagrande - Terzaghi). The preconsolidation stress values, as well as the consolidation curves, are slightly influenced by the separation of strains method applied, while using different preconsolidation stress theories deeply affects the final results.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.