Issue |
E3S Web Conf.
Volume 95, 2019
The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 5 | |
Section | Energy and Power System | |
DOI | https://doi.org/10.1051/e3sconf/20199502011 | |
Published online | 13 May 2019 |
Relationship between Spacing Rasio and Stiffness Coefficient by Using Smoothed Particle Hydrodynamics Method to Simulate Water – Solid Interaction
Civil Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
Scouring Phenomenon directly occurs on materials due to the motion of water flow and water borne sediments that researchers in the world continue to investigate. Scouring are then continuously developed in Computational Fluid Dynamics (CFD) to be able to estimate scouring effects by analyzing interaction between fluid and solid. Water and solid interaction can be researched by realizing three dimensional numerical modeling (3D) using Smoothed Particle Hydrodynamics Method which is modeling and visualizing fluid behavior with a Lagrangian approach in particle scale (micro scale), a more particle approach realistic than the grid approach. Using this method, the results of each particle can be reviewed either by their property values or visually so that the results are obtained more representatives. One of the factors affecting fluid-solid modeling is spacing ratio between solid particle and fluid particle. To obtain the correct physical results, it is required to consider the influence of spacing ratio and the value of Stiffness Coefficient (Ks) needed.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.