Issue |
E3S Web Conf.
Volume 95, 2019
The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 4 | |
Section | Materials Science and Engineering | |
DOI | https://doi.org/10.1051/e3sconf/20199504005 | |
Published online | 13 May 2019 |
Synthesis of AlMgB14: Effect of modes of mechanical activation of the raw powders on the properties of obtained materials
National Research Tomsk State University, Tomsk, 634050, Russia
In work studies of phase composition, hardness and density of materials based on AlMgB14 synthesized by hot pressing method at temperatures of 1300 and 1400 °C under pressure 50 MPa from aluminum, magnesium and boron powders (E1 mixture), as well as from original powder of aluminum-magnesium alloy (E2 mixture) were conducted. AlMgB14 phase content of obtained bulk samples is ~ 95 wt. %. The maximum hardness of 14GPa and density of 2.1 g/cm3, respectively, has a sample, marked as E1, synthesized at a temperature of 1400 °C.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.