E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||6|
|Section||Modern Building Materials|
|Published online||29 May 2019|
Composition and rheological characteristics of plaster mixtures
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
2 Research Institute of Building Physics of the Russian Academy of Architecture and Building Sciences, Lokomotivniy Tr., 21, Moscow, 127238, Russia
* Coresponding author: firstname.lastname@example.org
The applying of local building materials is an effective contribution to the savings of mineral resources, which are used for the production of basic building materials. Clay and gypsum compositions are the local raw materials in many regions of the country and some neighboring countries. The article discusses the method for determining the clay fraction in the clay and gypsum composition, as well as the method for assessing the rheological characteristics of the plaster mixtures for interior work based on clay and gypsum binder. It was established that the content of the clay fraction in the studied clay and gypsum composition is in the range of 30–32%. Plaster mixtures based on clay and gypsum binder can be considered as optimal compositions under the following conditions. The grade of mobility is not less than PK3 (8–12 cm) in cone penetration test, the ultimate shear stresses in the first seconds of the thixotropic hardening ensure no runoff for the adjusted thickness of the applied layer. With the mentioned mobility, the “creeping” on the concrete surface is 10% and less, and the “creeping” on the brick surface is no more than 5%. The allowable water-solid ratio is 0,46–0,50.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.