Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
---|---|---|
Article Number | 05050 | |
Number of page(s) | 10 | |
Section | Hydrotechnical Construction and Melioration | |
DOI | https://doi.org/10.1051/e3sconf/20199705050 | |
Published online | 29 May 2019 |
Modeling Procedure of Coastal Protection Shaped Blocks with High Wave Suppressing and Interlocking Capacity
1,2,4,5,6
Tsotne Mirtskhulava Water Management Institute of Georgian Technical University. 60-b, I. Chavchavadze Ave., 0179, Tbilisi, Georgia
3
Czestochowa University of Technology, Faculty of Civil Engineering, ul. Akademicka 3, 42-200 Czestochowa, Poland
A groyne is a shore protection structure built perpendicular to the shoreline of the coast (or river), over the beach and into the shoreface (the area between the nearshore region and the inner continental shelf), to reduce longshore drift and trap sediments. A groyne field or system is a series of groynes acting together to protect a beach. Concret is often used as construction material.
On the basis of analysis of wave suppression efficiency and stability on the slope of more than one hundred existing shaped massives the new type of coast protecting reinforced concrete blocks – so called “Hexablock” (“Hexablock” was called because of its 6 facets) characterized with higher wave suppression properties, interlocking capacity, stability on the slope and longer life time is proposed.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.