E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||9|
|Section||New Construction Technologies|
|Published online||29 May 2019|
Selection of compositions for additive technologies in construction
Immanuel Kant Baltic Federal University, 14 Nevskogo St, Kaliningrad 236016, Russia
* Corresponding author: email@example.com
Three-dimensional printing is an innovative digital technology and is one of the most significant achievements in the industrial and technological development of modernity. Digital 3D technologies have reached a colossal level of development over a period of about half a century since their invention. Using 3D printing in the construction of low-rise buildings, it becomes possible to implement almost any ideas and achieve the best architectural expressiveness of objects. The aim of this work is to create cement-based compounds that can be used in additive construction methods. A review of the scientific literature on this topic was carried out, the main components of the mixture were identified, and a series of field experiments were conducted. According to the results of the work, the optimal composition for 3D construction printing was determined.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.