E3S Web Conf.
Volume 175, 2020XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|Number of page(s)||7|
|Published online||29 June 2020|
3D environmentally friendly concrete printing model preparation
Peter the Great St.Petersburg Polytechnic University, Polytechnicheskaya Str.29, 195251, St.Petersburg, Russia
* Corresponding author: email@example.com
This article considers ways of the construction printing of models for agriculture, road, civil and also industrial construction using concrete mixtures. For acquaintance with technology, the architectural element with width of layer of 4 cm and 8 cm all model high has been taken with height of one layer of 2 cm. This model has been prepared with use of two packages of the program complexes having different functionality, namely AutoCAD+SheetCAM+Mach3, the second Sketch-Up+Simplify3D. Each software package was used for design of model in 2D or 3D perspectives, division of model into layers, identical on height, by means of technology of slicer, and also for creation of task of the model printing by concrete for the construction printer of model S 6044. Ready mixes for geopolymer concrete have been taken. By results of the printing, comparison of quality of the models printed on the construction printer and technology of each package of program complexes have been made. The printing of models has shown that quality of the printing is identical. In this case, the second method using a bundle of 2 programs (SketchUp + Simplify3D), which allows printing volumetric models of any shape both in plan and in the future, has an advantage.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.