| Issue |
E3S Web Conf.
Volume 100, 2019
11th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2019
|
|
|---|---|---|
| Article Number | 00029 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/e3sconf/201910000029 | |
| Published online | 10 June 2019 | |
Estimation of particles emissions from a jet engine in real flight
Poznan University of Technology, Institute of Combustion Engine and Transport, 3 Piotrowo Street, Poznan, 60-965, Poland
* Corresponding author: remigiusz.jasinski@put.poznan.pl
The article presents the results of particles measurements from a jet engine. Engine parameters were analysed during the actual flight and an attempt was made to map it in stationary tests. Research results were supported by correlation analysis. Based on measurements of particulate matter it was found that the most favourable conditions for particle formation occur during taxiing. Mass distributions were presented and emission factors were determined for three basic phases: taxiing, take-off and approach. The applied research methodology was based on the latest guidelines and was expanded to include propositions related to the analysis of engine operation in real flight conditions.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.