| Issue |
E3S Web Conf.
Volume 104, 2019
International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2019)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 4 | |
| Section | Integrated Measurement Information Processing Devices | |
| DOI | https://doi.org/10.1051/e3sconf/201910402007 | |
| Published online | 21 June 2019 | |
Electro-optical dust sensors calibration by aerosol image analysis
1
Don State Technical University, Department of Radio-electronic and electro-technical systems, 147 Shevchenko st., 346500 Shakhty, Russia
2
Don State Technical University, Department of Technical operation of cars, 147 Shevchenko st., 346500 Shakhty, Russia
* Corresponding author: semenov@sssu.ru
The paper describes the process of data obtaining for designing electro-optical sensors using a television aerosol particles image analyzer. Using simulation based on Mie theory, the process of calibration of simple electro-optical aerosol (dust) sensor is carried out. In the paper the main dependences for sensor calibration are shown. The proper calibration allows power saving by selection certain laser beam power level.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.