| Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
|---|---|---|
| Article Number | 01053 | |
| Number of page(s) | 7 | |
| Section | Environment Saving Mining Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/201910501053 | |
| Published online | 21 June 2019 | |
The Direction of Drilling Wells as a Factor of Improving the Crushing of Sedimentary
T.F. Gorbachev Kuzbass State Technical University, 650000, Kemerovo, Russian Federation
* Corresponding author: noa-0025@yandex.ru
The task of the work is to improve the quality of preparation of the rock mass for excavation. Explosive destruction of the rock is based on several theories developed by well-known scientists. The improvement of quality of preparation of rock mass to excavation without an increase in the value of specific consumption of explosives is important in the present time. The analysis of scientific works and industrial results of explosive preparation of the overburden removal is made. It is established that depending on the angle of the explosive charges meeting with the rock layers, the quality of its crushing changes. Modern drilling machines can drill at any angle. It is proposed to drill wells perpendicular to the rock layers. The proposal differs in originality from the previously known principles of charge placement of explosives in wells. This method of charge placement has a positive effect in sedimentary rocks in coal mines. The results of industrial explosions in coal mines have confirmed the theoretical reasoning.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.