Issue |
E3S Web Conf.
Volume 109, 2019
International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00031 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/201910900031 | |
Published online | 09 July 2019 |
An effective way to rock mass preparation on metallic and nonmetallic quarries Ukraine
1
Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 49005, Dnipro, Simferopolska Str., 2a, Ukraine
2
State Technological University, 18007, Cherkasy, Shevchenko Str., 152, Ukraine
* Corresponding author: ishenko_k@i.ua
A method in experimental studies and industrial-polygon particular conditions justifying the choice of a rational design of an explosive charge. The comparative results of the evaluation of the stress wave’s amplitudes studies and the character of crushing hard media from the explosion of the charge explosives-variable and constant cross section. The dependences of the particle size distribution of various designs explosive charges destroyed by the explosion are constructed. In industrial conditions, the rationale for the explosive boreholes location according to the massif structure. Adjusted boreholes location grid on rational parameters blasting unit, determined using a novel method of breaking rock complex structure. A new design of a combined borehole charge of variable cross section has been proposed. Industrial tests performed and evaluation of the effectiveness of the proposed method blasting locally fractured rocks and ore deposits on non-metallic minerals. Recommendations on their use are given.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.