E3S Web Conf.
Volume 108, 2019Energy and Fuels 2018
|Number of page(s)||10|
|Published online||05 July 2019|
Monitoring of the Operating Parameters a Low-Temperature Fuel-Cell Stack for Applications in Unmanned Aerial Vehicles: Part II
AGH University of Science and Technology, Faculty of Energy and Fuels, al. A. Mickiewicza 30, 30-059 Kraków, Poland
2 AGH University of Science and Technology, Center of Energy, str. Czarnowiejska 36, 30-059 Kraków, Poland
3 UAVS Poland Sp. z o.o.
4 AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, al. A. Mickiewicza 30, 30-059 Kraków, Poland
* Corresponding author: firstname.lastname@example.org
The second part of the paper is aimed at the analysis of hydrogen fuel demand for the operation of a PEMFC stack. The methodology of hydrogen utilisation for the production of electrical energy and for purging (purification processes) is presented. Based on the laboratory data derived from the electrical and non-electrical parameters recorded in this part of the paper, the design of the monitoring and control system of stack performance was elaborated and the implementation of the system tested. This solution enables not only the monitoring and control of electrical parameters, temperature, and humidity, but also management of the degree of humidification of PEMFC membranes using a short-circuit unit.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.