E3S Web Conf.
Volume 109, 2019International Conference Essays of Mining Science and Practice
|Number of page(s)||9|
|Published online||09 July 2019|
Modelling of mined rock thin layer disintegration taking into consideration its properties changing during compaction
Dnipro University of Technology, 49005, Dnipro, Yavornytskoho Ave., 19, Ukraine
2 Al-Balqa Applied University, Amman 11134 Jordan 15008
3 Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 49005, Dnipro, Simferopolska Str., 2a, Ukraine
* Corresponding author: email@example.com
The aim of the work is modelling of stressed condition of the loose mined rock thin layer between two parallel working plates of disintegrator, taking into consideration the dependences of the layer porosity and its side thrust coefficient on the main stress value with hereditary model of deformation accumulation. The equation of extreme balance of mined rock compactable thin layer is obtained for the case of its compression with partial sliding on working surfaces. It is shown, that there is no sliding in the central area of deformed zone, unlike the peripheral area. The iterative algorithm for parameters calculation of the layer stressed condition for the hypothesis of symmetric parabolic distribution of the axial normal stresses in the directions being perpendicular to the plates is developed. The distributions of the side thrust coefficient in the layer, the effective coefficient of external friction and the stresses of disintegrators working surfaces are grounded. The practical value of the research is the possibility to determine precisely the contact forces while crushing of fine-grained material taking into consideration its compactibility.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.